Years: 2019 -2024
KTM Super 690
The new, Super 690 kit is here!
Designation: KS1
The Super 690 is a kit that allows you to extend the fuel capacity of your 690 up to 28 lt using OEM KTM Rally parts.
Fuel capacity
Super 690
28 Liters
Ducati DesertX
21 Liters
Yamaha T700
16 Liters
690 Enduro stock
13 Liters
Afraid of the unknown? Fear no more! The 701 Xplorer comes with two fuel pumps manually selectable.
We have added the OEM Keihin rally pump complete with a fuel warning light to ensure that you will get to the next resting point whatever the circumstances.
An optional third pump can be installed, ready to roll if things get tough! We even went as far as researching a fuel pump motor that we can guarantee for life (available as an upgrade).
Pre-assembled fuel lines with factory KTM CPC quick connect/disconnect couplings and dual anodised billet non-return valves. We went a step further and used two extra fuel filters in the fuel lines for your safety. This gives you the ability to donate fuel to a fellow rider through the innovative piping system.
Afraid that your fuel lines will get hot? We took care of that. Heat shield sleeves are installed in all the critical areas to ensure that your bike will stay cool whatever the weather conditions!
Whether you are out racing in the dunes or simply enjoying your trip to the unknown, allow us to take care of your comfort.
A dedicated Fiberglass reinforced ABS seat pan with a molded foam and ultra grip cover will ensure that you arrive comfy in your destination.
Made from high quality stainless steel the exhaust header, with optional rally racing silencer.
Want to keep your stock exhaust or already have an after market silencer? Fear no more! We routed the exhaust header so that the stock silencer position can be kept.
CFCP is a small company located in Greece and we trust no one else for all our Carbon Fiber parts. We are proud to have such a skid plate on our kit.
Ground clearance is maximized and you get enhanced protection of the suspension linkage. The skid plate brackets are composed of Aluminum and Stainless steel and with addition of Antivibration Dampeners your frame is protected in case of a violent impact.
The tank brackets have been design to keep your frame intact, allowing you to safely return the vehicle to its original state or even get TUV approval in certain countries.
You'd be happy to know that our Xplorers have passed TUV approval in Germany, Austria and Switzerland!
Can't decide? See what is the best solution for you!
Click on the ''COMBINED' button on the top left corner to see all charts in one.
What you see here is a spider (or radar) chart. We are comparing the OEM bike vs different Aurora Layouts that we have in our range. There are six areas of interest.
1. Ergonomics. This is your instrument layout. Are they in a better position? Easier to see? Higher is better.
2. Fuel Capacity. Straight forward. Higher means more fuel!
3. Protection. This is protection from the elements and is based on our own tests and feedback from customers. The highr the protection, the higher the number.
4. Lights. OEM lights are fully legal. In our kits not only you upgrade the lights, but you can install full off-road LED units for max performance.
5.Weight. That's a necessary evil. We remove and we add parts on the bikes and the net effect is sometimes a heavier bike, or in the case of our Superlight kit a lighter bike.
6. Racing. Get ready to race! Higher is better.
Choose your areas of interest and get the best possible solution! A full comparison can be found in the FAQ section.
Design
It is unique! The Super 690 is a kit that will allow you o travel further down the trails without the added weight of a navigation tower. Keep it simple! Buy the Lite kit at a later stage and convert this beast to a true Xplorer.
Enormous fuel capacity! Add another 15 liters of fuel on your bike using rally proven KTM ® parts.
It's reliable! The secondary fuel pump will allow you to control the weight bias (by emptying the front or rear tanks separately). This way you can either save the rear tire when riding in tarmac, or make for a lighter front when off-road. All fuel lines have QCD couplings and special injection rated non-return valves.
It's comfortable! The unique seat, manufactured out of ABS with a molded foam with a seat cover from Blackbird Racing will allow you to travel for long hours and reach your destination stress free, keeping your rear comfy during these long journeys!
It's reversible! No modification to the frame needed at all. It is important to make sure that your warranty is sill valid, and should you choose to return the bike in its original state, you can do it on the spot!
The kit comes pre-assembled! Everything is assembled for ease of use and reference. Our team is online close to 24/7 and you can text, e-mail us should you need help so that installation goes smoothly!
It is FUN! This bike is a joy to ride, reminding us the 950 Super Enduro in a modern way. It has volume due to the tanks, but a very slim front making it a very macho looking bike which is a joy to ride both on and off-road.
Serial numbers in all parts! Each sub-assembly has a dedicated, unique serial number. We are able to back trace down to the person and the exact date that this sub-assembly was manufactured. Our unique quality control system means ease of mind when you install and Aurora!
Fuel Tanks and fuel pump!
A fully loaded Super 690 will hold approximately 28 liters of fuel. That is more than double the quantity of the stock bike. The KTM ® tanks are used on this kit. These are made from KTM ®. These Dakar winning tanks need no introduction as they have won multiple times in the desert, they are robust, strong and you can replace them in any KTM ® dealer worldwide.
Never give up with the second fuel pump. Control the weight bias of the bike and save rear tire or unload the front for maximum control!
Tank Brackets!
Aurora Super 690 comes with dedicated tank brackets. Pioneering in materials use and design, these tank brackets will not modify in any way the frame of your bike. We firmly believe that the owners should be able to return the bike to its full legal state without losing their OEM warranty. Installation is a breeze, no need to remove the internals of the rear tank, no need to worry about strength!
Redundant fuel pump system.
Afraid of the unknown? Fear no more! Aurora Super 690 comes with two fuel pumps manually selectable. We added the OEM Keihin, rally pump and its fuel warning light to ensure that you will get to the next resting point whatever the circumstances. We went as far as researching a fuel pump motor that we can guarantee for life (available as an option).
As an extra bonus you can control the weight bias of your adventure bike. Empty the rear fuel tank first to save the rear tire during tarmac rides, or empty the front tanks to lighten the front!
Comfortable seat.
Either you are out racing against the clock or you are enjoying your trip to the unknown, allow us to take care of your comfort. We went to manufacture a mold, specifically for this kit. Dedicated ABS seat pan reinforced with glass fiber and a molded foam will make sure that you arrive comfy in your destination!
The cover with special anti-slip material is manufactured by Blackbird Racing®
What's included in the kit
- Front tanks (Factory KTM parts), Left and Right – with all accessories. Front tanks are interconnected. Tygon yellow breather pipes with billet Aluminium front caps. Tank breathing is interconnected with a metallic tee. Triple layer thermal reflector installed on the left tank to reduce heat transfer from the exhaust.
- Tank brackets (Aluminium, steel and stainless steel used). Warrantied for life. All tank brackets are adjustable.
- ABS side panels. We suggest on how to shape them and you’d have to trim the side panels to shape. Be creative and make your own unique Super 690!
- Side panel brackets.
- Rectiifer relocation bracket.
- Fuel pump, OEM Keihin. Optional: Upgrade the pump motor and get a lifetime warranty on the pump!
- Dedicated exhaust header, stainless steel. Handcrafted.
- Fuel piping. Two billet non return valves, all preassembled. Plug and play. Heat shields installed in the fuel lines that need to be protected.
- All wiring. Plug and play. (Toggle for pump selection, reserve light etc).
- QuickCharge 3.0 USB charger.
- Carbon fiber/aramid reinforced skid plate. Brackets with shock absorbers to protect the tanks in case of a heavy crash. The new skid plate protects the rear brake pump and the linkage of the bike.
- ABS molded seat pan. Durable seat cover and dedicated polyurethane foam to make you feel comfortable in long trips.
TURN INDICATORS IN USA
Due to different regulations in the US, the OEM front turn indicators are bigger and will not fit in the available space on the tower. It is advisable to buy a smaller LED set.
PARTS THAT NEED TO BE MODIFIED TO THE POINT BEYOND RETURN
TO BE MODIFIED TO THE POINT BEYOND RETURN
We recommend to trim the side frame covers. To revert back to the OEM, we can supply the covers when you order the kit.
You need to cut the rear part of the front mask of the bike to remove it if you don't want to detach the brake lines from the bike
Product Details
Data sheet
- Turn indicators relocation
- It is advisable to reposition the front indicators on the mask about 50mm higher than the OEM position, otherwise they will be touching the tanks when you fully turn the steering left or right.
- Rally kit features
- Additional fuel pump
Additional fuel tanks
CNC tank mounts
Custom seat
Exhaust header
KTM OEM Rally parts
Side panels
Stickers - Motorcycles
- KTM 690 Enduro
- Custom product layout for kits
- Yes
- Tailor made product
- Yes
New